OWNER’S MANUAL
Color Television
20MS334R
NEED HELP? CALL US!
MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY
QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE YOU THROUGH
CONNECTIONS, FIRST-TIME SETUP,AND ANY OF THE FEATURES.
WE WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY.
CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.MAGNAVOX.COM
IMPORTANT!
RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.
SEE WHY INSIDE.
IB8421E001/3141-055-21471
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
B. Objects have fallen or liquid has been spilled into the appliance;
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
C. The appliance has been exposed to rain;
D. The appliance does not appear to operate normally or exhibits
a marked change in performance;
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance
with the manufacturer’s instructions.
E. The appliance has been dropped or the enclosure damaged.
17.Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet, which could ultimate-
ly overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsus-
pectingly fall from the top of the set and cause product damage
and/or personal injury.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug.A polarized plug has two blades with one wider than the
other.A grounding type plug has two blades and a third grounding
prong.The wide blade or third prong are provided for your safety.
When the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched, particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with a cart, stand, tripod, bracket, or table specified by
the manufacturer or sold with the apparatus.When a cart
is used, use caution when moving the cart/apparatus com-
bination to avoid injury from tip-over.
18.Wall or Ceiling Mounting - The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
19.Power Lines - An outdoor antenna should be located away from
power lines.
20.Outdoor Antenna Grounding - If an outside antenna is con-
nected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.
Section 810 of the National Electrical Code,ANSI/NFPA No. 70-
1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding connectors, loca-
tion of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See Figure below.
21.Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
13.Unplug this apparatus during lightning storms or when unused for
long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
if the power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, or if the apparatus has
been exposed to rain or moisture, does not operate normally, or
has been dropped.
15.This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance (www.eiae.org).
16.Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
22.Battery usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the
unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
A. The power supply cord or the plug has been damaged;
Note to the CableTV system installer: This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system
of the building, as close to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electrical Code
3
CONTENTS
Here are a few of the special features of your new Color
Television.
Audio/Video In Jacks: Use to quickly connect other equip-
ment to the front of your TV.
Introduction
Welcome/TV Registration . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Automatic Channel Programming (Auto Program):
Quick and easy setup of available channels.
Closed Captioning: Allows the viewer to read TV program
dialog or voice conversations as on-screen text.
On-screen Menus: Helpful messages (in English or Spanish)
for setting TV controls.
Remote Control: Works your TV features.
SleepTimer: Turns off the TV within an amount of time you
specify (10-240 minutes from the current time).
SmartLock™: Lets you block viewing of certain TV channels
if you do not want your children viewing inappropriate materi-
al.This is referred to as AutoLock on some models.
SmartPicture™: Lets you set the picture’s color, tint, con-
trast, etc., for various types of programming. Settings include
Sports, Movies,Weak Signal, Multi Media, and Personal.
SmartSound™: Lets you set the TV’s sound settings for the
current programming. Choices include Personal,Theatre, Music,
orVoice.
Getting Started
Basic TV and Remote Control Operations . . . . . . . . . . . . .5
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Basic Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . .7
Basic Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . .7
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Audio/Video In Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installation
Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Tuner Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Auto Program (Setting Up Channels) . . . . . . . . . . . . . . . .12
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Picture
Standard broadcast (VHF/UHF) or CableTV channel
capability
Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Stereo capability: Includes a built-in amplifier and twin-
speaker system, allowing reception of TV programs broadcast
in stereo.
Treble Boost, Bass Boost, and Balance: Enhance the TV’s
sound.
Sound
Sound Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Features
SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
SmartLock - Access Code . . . . . . . . . . . . . . . . . . . . . . . .17
SmartLock - Block Channels . . . . . . . . . . . . . . . . . . . . . .18
SmartLock - Clear All . . . . . . . . . . . . . . . . . . . . . . . . . . .19
SmartLock - Block All . . . . . . . . . . . . . . . . . . . . . . . . . . .20
SmartLock - Movie Ratings . . . . . . . . . . . . . . . . . . . . . . .21
SmartLock - TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . .22
SmartLock - Blocking Options . . . . . . . . . . . . . . . . . . . . .23
Timer (Clock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
NOTE: This manual covers different versions and models.
Not all features described in this manual will match those of
yourTV. This is normal and does not require you contacting
your dealer or requesting service.
END-OF-LIFE DISPOSAL
Remote Control Operations
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
SmartPicture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
SmartSound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
SmartSurf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Your new television and its packaging contain materials that
can be recycled and reused. Specialized companies can recycle
your product to increase the amount of reusable materials and
minimize the amounts that need to be properly disposed.
Your product also uses batteries that should not be thrown
away when depleted, but should be handed in and disposed of
as small chemical waste.
When you replace your existing equipment, please find out
about the local regulations regarding disposal of your old tele-
vision, batteries, and packing materials.
General Information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . .32-33
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
SmartPicture™, SmartSound™, and SmartLock™ are registered
trademarks of Philips Consumer Electronics North America.
Copyright © 2003 Magnavox. All rights reserved.
4
BASIC TV AND REMOTE CONTROL OPERATIONS
TELEVISION
y
Press POWER
to turn on the TV.
Or, you can press any button on the
front of the TV to turn on the TV.
1
2
3
4
PressVOLUME + to increase the
sound level. Or, pressVOLUME – to
lower the sound level.
MENU
VIDEO
L
AUDIO
R
–
VOLUME
+
CHANNEL
Press CHANNEL 5 or M to select
TV channels.
MENU
VIDEO
L
AUDIO
R
–
VOLUME
+
CHANNEL
HEADPHONES
1
2
3
You can connect headphones (not
supplied) to the n jack on the
front of the TV for personal listening.
4
5
REMOTE CONTROL
1
Point the remote control toward
the remote sensor on the front of the
TV when operating the TV with the
remote.
BATTERY INSTALLATION
Remove the battery compart-
ment lid on the back of the remote.
6
7
Place two AA batteries in the
remote. Be sure the (+) and (-) ends
of the batteries line up as marked
inside the battery compartment.
Reattach the battery compart-
ment lid.
6
8
8
7
HELPFUL HINTS
The current channel number will appear
briefly when you turn on the TV and when
you change channels.
Press STATUS/EXIT on the remote to see
the current TV channel number.
5
REMOTE CONTROL
NUMBER Buttons
POWER button
Press to turn the TV on or off.
Press the Number buttons to select
TV channels or to enter values in the
menu. For single-digit channels, press
the Number button for the channel
you want. The TV will pause briefly
before going to the chosen channel.
POWER
1
4
2
5
8
0
3
6
CH(annel) +/– Buttons
Press to scan memorized channels.
CH
CH
7
9
VOL(ume) +/– Buttons
Press to increase or decrease the
sound.
A/CH Button
A/CH
CC
VOL
VOL
(Alternate Channel)
Press to switch between the last
channel and the present channel.
Details are on page 29.
STATUS
EXIT
Arrow 2 3 5 M Buttons
Press to select or adjust items in the
menu.
MENU
STATUS/EXIT Button
Press to see the current channel
number. Press to remove a menu.
SLEEP
CLOCK
MUTE
MENU Button
SURF
SMART
Press to see the menu. Press repeat-
edly to return to previous menus or
remove the menus.
CC Button
Press to activate Closed Captioning.
Details are on page 26.
PICTURE SOUND
MUTE Button
SLEEP Button
Press to eliminate or restore the TV
sound. MUTE will appear on the TV
when the sound is muted.
Press to set the TV to turn itself off
within a certain time. Details are on
page 25.
MAGNAVOX
SMART SOUND Button
Press to choose a sound setting.
Details are on page 28.
CLOCK Button
Press for quick access to the Time
menu. Details are on page 24.
SMART PICTURE Button
Press to choose a picture setting.
Details are on page 27.
SURF Button
If your TV model has SmartSurf, press
this button to move through the
channels you have set. Details are on
page 29.
This feature is not available on
all models.The button will have
no use if SmartSurf is not
included on your model.
6
BASIC ANTENNA CONNECTION
combination antenna receives normal
Outdoor or Indoor Antenna
(CombinationVHF/UHF)
Abroadcast channels (VHF 2–13 and
UHF 14–69).Your connection is easy
because there is only one 75Ω (ohm)
antenna jack on the back of yourTV, and
that’s where the antenna goes.
If your antenna has a round cable
1
(75 ohm) on the end, then you're
1
ready to connect it to the TV.
If your antenna has flat, twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the
Twin-lead
wire to
300-75Ω
adapter
2
screws on a 300- to 75-ohm adapter.
Connect the antenna (or adapter)
A
N
T
7
5
‰
OR
to the 75Ω (ohm) jack on the back of
2
the TV. If the end of the antenna wire
75Ω jack on rear
of Television
is threaded, screw it down finger tight.
Antenna
with 75Ω
cable
BASIC CABLE TV CONNECTION
our CableTV signal into your home may be a
Ysingle, 75Ω (ohm) cable. If so, this connection
is very simple. Follow the step below to connect
your CableTV signal to your new television.
Cable TV signal from
Cable Company
(75Ω coaxial cable)
Connect the CableTV signal to the
1
75Ω jack on the TV. Screw it down fin-
1
ger tight.
A
N
T
7
5
‰
75Ω jack on rear
of Television
HELPFUL HINT
Use Auto Program as described on page 12
to set up channels that are available in your
area. Use the CH +/– buttons to scan avail-
able channels.
7
CABLE BOX CONNECTIONS
f you have a Cable Box, follow either set of these steps to
Cable TV signal from
the Cable Company
Icomplete your connections.
4
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound to the TV.
The sound from the Cable Box will be monaural (single-
channel, not left and right).
2
1
OUTPUT
CH
3
4
CABLE
IN
TO TV
Connect the CableTV signal to the IN jack
(or RF IN or CABLE IN) on the Cable Box.
1
75Ω
Coaxial
Cable
Connect an RF coaxial cable (not supplied) to the
OUT jack (or TO TV or RF OUT) of the Cable
2
Box.
3
Connect the other end of the coaxial cable
to the TV’s 75Ω jack. Screw it down finger tight.
3
4
A
N
T
7
5
‰
Set the Channel 3/4 (or Output channel)
switch of the Cable Box to 3 or 4. Set the
75Ω jack on rear
of Television
TV to the same channel. When watching TV
programming, change channels at the Cable Box,
not the TV.
Cable Box with
Audio/Video Out Jacks
This connection will supply Stereo sound to the TV.
Connect the CableTV signal to the IN jack
(or RF IN or CABLE IN) on the Cable Box.
1
2
Using an RCA-type video cable, connect one
end of the video cable to theVideo Out
jack of the Cable Box.
Connect the other end of the cable to the
yellowVIDEO In jack on the front of theTV.
Video cables are usually marked with yellow and
are available from Magnavox or electronics retail-
ers. Video jacks on most equipment are yellow.
MENU
VIDEO
L
AUDIO
R
–
VOLUME
+
CHANNEL
MENU
Using RCA-type, stereo audio cables, connect
VIDEO
L
AUDIO
R
–
VOLUME
+
CHANNEL
one end of the cables to the left and right
3
Audio Out jacks of the Cable Box.
Connect the other end of the cables to the
red and white AUDIO L/R (left/right) In
jacks on the front of theTV.
Audio cables are usually marked with red and
white and are available from Magnavox or elec-
tronics retailers.
3
2
Audio cables
(red and white)
Video cable
(yellow)
1
Cable
TV signal
OUTPUT
CH
The right audio jack is red and the left audio jack
is white. Match the cable colors to the jack colors.
3
4
L
R
CABLE
IN
VIDEO
OUT
TO
TV
AUDIO
OUT
Cable Box
Press the CH +/- buttons to set theTV to
the FRONT channel. (Go to your lowest
4
channel, for example channel 1, then change chan-
nels down to find FRONT.)
When watching TV programming, change channels
at the Cable Box, not the TV.
8
AUDIO/VIDEO IN JACKS
he AUDIO andVIDEO In jacks on the front
Tof theTV enable quick connections of other
equipment. Connect aVCR, DVD Player,Video
Game, Camcorder, etc., to these jacks.To view
the material playing on the other equipment, set
theTV to its FRONT channel.
Connect an RCA-style video
cable (usually yellow) to theVIDEO
OUT jacks of the other equipment
(DVD Player, Camcorder, etc.) and to
the yellowVIDEO In jack on the front
of the TV.
1
2
MENU
VIDEO
L
AUDIO
R
–
VOLUME
+
CHANNEL
If the other equipment has red
and white, left and right, stereo
audio out jacks: Connect RCA-style
audio cables (usually red and white) to
the AUDIO OUT (left and right) jacks
on the other equipment. Connect the
other end of the cables to the red and
white AUDIO In (L/R left/right) jacks
on the front of the TV. Match the
cable colors to the jack colors.
MENU
VIDEO
L
AUDIO
R
–
VOLUME
+
CHANNEL
3
2
Audio Cables
(red and white)
The TV will receive sound from the
other equipment in stereo (from the
left and right sound channels).
1
Video Cable
(yellow)
VIDEO
L
AUDIO
R
If the other equipment has only
one AUDIO OUT (white) jack:
Connect an audio cable to the
AUDIO OUT jack on the other
equipment. Connect the other end of
the cable to the white AUDIO In (L-
left) jack on the front of the TV.The
TV will receive sound from the other
equipment through a single audio
channel.
Turn on the TV and other equipment.
3
4
Press the CH +/- buttons to set the
TV to its FRONT channel. (Go to
your lowest channel, for example chan-
nel 1, then change channels down to find
FRONT.)
Press PLAY on the other equipment
to view its material on the TV.
5
HELPFUL HINT
Audio and video cables are not supplied
with the TV, but are available from
Magnavox or electronics retailers.
9
MENU LANGUAGE
heTV menus are available in English and
TSpanish.To change the language, follow these
steps.
Press MENU to see the menu.
1
Main
Press 5 or M to highlight
Picture
Sound
Features
Install
Brightness
Color
INSTALL.
2
Picture
Sharpness
Tint
Main
Picture
Press 3 to see the INSTALL
Language
menu.
Sound
Features
Install
3
Tuner Mode
Auto Program
Channel Edit
More...
Press 5 or M to select LAN-
GUAGE.
4
Press 3 to select ENGLISH or
ESPAÑOL (Spanish).
5
6
POWER
1
4
2
5
8
0
3
Press STATUS/EXIT to remove the
menu.
Install
6
2
Language
English
7
9
Tuner Mode
Auto Program
Channel Edit
4
A/CH
CC
6
VOL
STATUS
EXIT
MENU
OR
SLEEP
C
MUTE
1
3
5
SURF
SMART
Instalar
Idioma
Español
PICTURE SOUND
Sintonia
2
4
Auto Programa
Editar Canal
MAGNAVOX
HELPFUL HINT
The Language control only makes the TV’s
on-screen menu appear in English or
Spanish text. It does not change other on-
screen text, such as Closed Captions.
10
TUNER MODE
uner Mode lets you tell theTV whether you
Tconnected a regular antenna or a CableTV
signal to it.This information is necessary when
you set up channels at theTV, so setTuner Mode
correctly for your type of connection.You can set
Tuner Mode to Auto if you want theTV to
choose the type of signal (antenna or CableTV)
on its own.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Press MENU to see the menu.
1
Language
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
More...
Press 5 or M to highlight
INSTALL.
2
Press 3 to see the INSTALL menu.
3
Press 5 or M to select TUNER
POWER
1
4
2
5
8
0
3
6
9
MODE.
Install
4
Language
English
2
Press 3 to select ANTENNA,
CABLE, or AUTO.
Tuner Mode
Auto Program
Channel Edit
Antenna
7
5
4
A/CH
CC
6
Press STATUS/EXIT to remove the
menu.
VOL
STATUS
EXIT
6
MENU
OR
SLEEP
CK
MUTE
1
SURF
SMART
3
5
Install
Language
English
Cable
PICTURE SOUND
Tuner Mode
Auto Program
Channel Edit
2
4
MAGNAVOX
OR
Install
Language
English
Auto
Tuner Mode
Auto Program
Channel Edit
HELPFUL HINTS
When CABLE is selected, channels 1-125
are possible.
When ANTENNA is selected, channels 2-
69 are possible.
When AUTO is selected, the TV will detect
whether to receive Antenna or Cable TV
channels.
11
AUTO PROGRAM (SETTING UP CHANNELS)
ourTV can receive Antenna (local) or Cable
YTV channels.This makes it easy for you to
scan through only available channels when you
use the CH +/- buttons.
Before you start Auto Program, connect the
Antenna or CableTV signal to theTV as
described on page seven.Also make sureTuner
Mode is set correctly as described on page 11.
Main
Picture
Brightness
Color
Sound
Features
Install
Picture
Sharpness
Tint
Main
Picture
Press MENU to see the menu.
Language
1
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
More...
Press 5 or M to select INSTALL.
2
Press 3 to see the INSTALL menu.
3
POWER
1
4
2
5
8
0
3
Press 5 or M to highlight AUTO
PROGRAM.
6
Install
4
5
2
Language
Press 3 to start scanning channels.
Auto Programming will store all avail-
able channels in the TV’s memory,
then tune to the lowest available
channel when done.
7
9
Tuner Mode
Auto Program
Channel Edit
4
A/CH
CC
6
VOL
STATUS
EXIT
MENU
Press STATUS/EXIT to remove the
menu.
SLEEP
MUTE
6
1
Auto Program
Channel
3
5
CLOCK
SURF
SMART
12
13
PICTURE SOUND
Auto Program
Channel
MAGNAVOX
Auto Program
Channel
14
HELPFUL HINT
If you have Cable TV, channels 1-125 are
possible. If you connect a regular antenna
to the TV, channels 2-69 are possible.
12
CHANNEL EDIT
hannel Edit makes it easy for you to add or
Cdelete channels from theTV’s memory.This
enables you to scan only through the channels
you want when using the CH +/- buttons.
Press MENU to see the menu.
Main
1
Picture
Sound
Features
Install
Brightness
Color
Press 5 or M to select INSTALL.
Picture
Sharpness
Tint
Main
Picture
2
Language
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
Press 3 to see the INSTALL menu.
3
More...
Press 5 or M to choose
CHANNEL EDIT.
4
Press 3 to see the CHANNEL
EDIT options.
POWER
1
4
2
5
8
0
3
5
6
2
4
CH
6
Install
With CHANNEL NO. selected,
Language
Channel No.
Skipped
6
9
CH
7
9
press the Number buttons or the
Tuner Mode
Auto Program
Channel Edit
6
CH +/- buttons to enter the
A/CH
CC
VOL
VOL
channel you want to add (Skipped
OFF) or delete (Skipped ON).
STATUS
EXIT
Press M to select SKIPPED.
7
MENU
SLEEP
MUTE
3
5
8
1
Press 3 to set SKIPPED to ON
or OFF.
If SKIPPED is ON, the channel will be
ignored (skipped) when you scan
channels using the CH +/- buttons.
If SKIPPED is OFF, the channel will be
available (not skipped) when you scan
channels using the CH +/- buttons.
Channel Edit
Channel No.
Skipped
8
CLOCK
SURF
SMART
12
2
4
7
PICTURE SOUND
Press STATUS/EXIT to remove the
menu.
MAGNAVOX
9
Channel Edit
Channel No.
Skipped
On
Off
Channel Edit
Channel No.
Skipped
13
PICTURE ADJUSTMENTS
o adjust yourTV picture, select a channel and
Tfollow these steps.
Main
Picture
Sound
Features
Install
Brightness
Color
Press MENU to see the menu.
1
Picture
Sharpness
Tint
Picture
Brightness
50
Press
5
or M to select PICTURE.
Color
More...
2
3
4
Picture
Sharpness
Tint
Press 3 to see the PICTURE menu.
Color Temp.
Press 5 or M to choose the item you
want to adjust: Brightness, Color,
Picture, Sharpness,Tint, Color Temp.,
DNR, or Contrast +.
1
4
2
5
8
0
3
2
Picture
6
65
50
Brightness
Color
4
Press 3 or 2 to adjust the item.
7
9
5
6
7
A/CH
CC
6
Picture
Press 5 or M to select and adjust
Brightness
7
VOL
STATUS
EXIT
other picture controls.
Color
Pcture
MENU
Press STATUS/EXIT to remove the
menu.
Picture
5
SLEEP
CLOCK
MUTE
Brightness
Color
3
5
Picture
50
SURF
SMART
1
Sharpness
PICTURE SOUND
Picture
2
4
6
Brightness
Color
Picture
Sharpness
Tint
50
MAGNAVOX
Color Temp.
HELPFUL HINTS
Brightness: Adjust to brighten the dark
parts of the picture.This appears to add
white to the color.
Picture
Picture
Brightness
Brightness
Color
Color
Picture
Picture
Sharpness
Tint
Sharpness
Tint
Color: Adjust to add or reduce color.
0
Color Temp.
Normal
Color Temp.
Picture: Adjust until the lightest parts of
the picture show good detail.
Sharpness: Adjust to improve detail.
Tint: Adjust to obtain natural skin tones.
ColorTemp.: Select NORMAL, COOL, or
WARM. NORMAL keeps white as white.
COOL creates blue-whites. WARM makes
red-whites.
Picture
Picture
Brightness
Color
Brightness
Color
Picture
Sharpness
Tint
Picture
Sharpness
Tint
DNR (Dynamic Noise Reduction): Set
DNR to ON to eliminate “noise” from the
picture.
DNR
On
Contrast +
On
Contrast +: Select ON to improve the
picture contrast and clarity.
14
SOUND ADJUSTMENTS
esides the normal volume control, yourTV
BhasTreble Boost, Bass Boost, Balance,AVL
(AutomaticVolume Leveler), and Sound
(Stereo/Mono) controls.
Main
Press MENU to see the menu.
Picture
Sound
Features
Install
Brightness
Color
Main
Picture
1
Treble Boost
Bass Boost
Balance
AVL
Picture
Sharpness
Tint
Press
5
or M to highlight SOUND.
Sound
Features
Install
2
3
4
More...
Sound
Press 3 to see the SOUND menu.
Press 5 or M to choose: Treble
Boost, Bass Boost, Balance,AVL,
or Sound.
Sound
POWER
1
4
2
5
8
0
3
6
9
On
Treble Boost
Bass Boost
Balance
AVL
Press 3 or 2 to turn the item On
or Off or to adjust the item.
2
5
6
7
Press STATUS/EXIT to remove the
menu.
Sound
A/CH
CC
4
6
VOL
STATUS
EXIT
MENU
5
Sound
SLEEP
CLOCK
MUTE
Treble Boost
Bass Boost
Balance
AVL
On
3
5
SURF
SMART
1
PICTURE SOUND
Sound
2
4
Sound
MAGNAVOX
Treble Boost
Bass Boost
Balance
AVL
L
R
Sound
HELPFUL HINTS
Treble Boost: Choose On to enhance
high frequency sounds.
Bass Boost: Choose On to enhance low
frequency sounds.
Balance: Distribute the sound between
Sound
Sound
the left and right speakers of the TV.
Treble Boost
Bass Boost
Balance
AVL
Treble Boost
Bass Boost
Balance
AVL
AVL (AutomaticVolume Leveler):
Choose On to even out the sound during
sudden volume changes, for example during
commercials or channel changes.
On
Sound
Stereo
Sound
Sound: Choose Stereo or Mono. If Stereo
is not present on the current program and
the TV is in Stereo mode, the sound from
the TV will remain monaural (single-channel
sound or Mono). Stereo sound comes from
two channels, the right and the left.
15
SMARTLOCK
martLock (AutoLock) processes program
Scontent advisories from broadcasters.
SmartLock can respond to the content advi-
sories and block objectionable content (offen-
sive language, violence, sexual situations, etc.).
This is a great feature to censor the type of
programming children watch.
Movie Rating
TV Rating
TV-Y
G
On
On
PG
PG-13
R
TV-Y7
TV-G
TV-PG
TV-14
NC-17
X
SmartLock offers various blocking
options from which to choose:
Block Channel: Block individual chan-
nels, including the FRONT (Audio/Video In)
channel.
TV-MA
Clear All: Allows you to clear and view
all previously blocked channels.
MOVIE RATINGS
TV RATINGS
Block All: Blocks all channels from view-
ing, including the FRONT channel.
Movie Rating: Blocks programming
based on ratings of the Motion Pictures
Association of America.
TV Rating: Blocks programming based
on TV broadcast ratings.
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages.This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialog or situa-
tions.
TV-Y All children - Appropriate for all
children. Designed for a very young
audience, including children ages 2-6.
TV
Y
This type of programming is not expected to
frighten younger children.
TV-Y7 Directed to Older Children
- Designed for children age 7 and above.
It may be more appropriate for chil-
TV
Y7
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children. It may
Press STATUS/EXIT twice to see the
dren who can distinguish between make-
believe and reality.This programming may
include mild fantasy and comic violence (FV or
fantasy violence).
SmartLock review screen, which shows contain one or more of the following: moder-
ate violence, some sexual situations, infrequent
coarse language, or some suggestive dialog.
the current SmartLock settings.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the age
of 13. It contains one or more of the follow-
ing: violence, sexual situations, coarse language,
or suggestive dialog.
TV-G General Audience - Most par-
TV
ents would find this programming suitable
Gfor all ages. This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialog or situa-
tions.
R: Restricted -This programming is specifically
designed for adults. Anyone under the age of
17 should only view this programming with an
accompanying parent or adult guardian. It con-
tains one or more of the following: intense vio-
lence, intense sexual situations, strong coarse
language, or intensely suggestive dialog.
TV-PG Parental Guidance
Suggested - Contains material that par-
ents may find unsuitable for younger chil-
TV
PG
dren. This type of programming contains one or
more of the following: Moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialog (D).
NC-17: No children under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only. It contains
graphic violence, explicit sex, or crude, inde-
cent language.
TV-14 Parents Strongly Cautioned
TV
- Contains some material that many par-
14 ents would find unsuitable for children
under age 14. This type of programming con-
tains one or more of the following: intense vio-
lence (V), intense sexual situations (S), strong
coarse language (L), or intensely suggestive dia-
log (D).
X:Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, and very coarse and
intensely suggestive language.
TV-MA Mature Audience Only -
Specifically designed to be viewed by
adults and may be unsuitable for children
TV
MA
under 17. This type of programming contains
one or more of the following: graphic violence
(V), explicit sexual situations (S), or crude,
indecent language (L).
Some models refer to
SmartLock as AutoLock.
These features are the same.
16
SMARTLOCK - ACCESS CODE
ver the next few pages you’ll learn how to
Oblock programs and understand the rating
terms for certain broadcasts. First, set an access
code.
Main
Picture
Brightness
Color
Sound
Features
Install
Picture
Sharpness
Tint
Press MENU to see the menu.
More...
1
Press
5
or M to select FEATURES.
Main
Picture
Timer
2
3
4
Sound
Features
Install
SmartLock
POWER
1
4
2
5
8
0
3
Press 3 to see the FEATURES menu.
6
2
7
9
6
7
Press 5 or MMto select SmartLock
(AutoLock).
4
3
5
A/CH
CC
VOL
STATUS
EXIT
Features
MENU
Timer
Press 3. ACCESS CODE - - - - will
appear on the screen.
SmartLock
1
SLEEP
LOCK
MUTE
5
6
SURF
SMART
Use the Number buttons to
enter 0, 7, 1, 1. This is the TV’s
default code.“XXXX” will appear on
the screen as you enter the code.This
protects its identity.
If INCORRECT appears, enter 0711
again.
PICTURE SOUND
2
4
Features
Timer
Access Code
- - - -
SmartLock
MAGNAVOX
The screen will prompt you to enter a
new code. Enter a new four-digit
code using the Number buttons.
The screen will prompt you to con-
firm the code you just entered. Enter
your same new code again.
“XXXX” will appear when you enter
your new code, then the SmartLock
(AutoLock) menu will appear.
7
Features
Timer
Features
Timer
Features
Timer
SmartLock
Access Code
XXXX
SmartLock
Access Code
XX - -
SmartLock
Access Code
XXXX
Incorrect
To change the Access Code later, follow steps
1-6 so the SmartLock menu appears.
Press 5 or
M
to select Setup Code, then
press 3. Use the Number buttons to enter a
new code and confirm it. CONFIRMED
appears when the new code is set.
Features
Timer
Features
Timer
Features
Timer
SmartLock
SmartLock
New Code
- - - -
SmartLock
New Code
XX - -
Confirm Code
XXXX
Some models refer to
SmartLock as AutoLock.
These features are the same.
SmartLock
SmartLock
Block Channel
Setup Code
Clear All
Block Channel OffStop Time
Setup Code
Clear All
Channel
Activate
Display
OffStop Time
Channel
Activate
HELPFUL HINTS
Block All
Block All
You cannot unblock a channel without
knowing your code or changing it. If your
code changes, someone has altered it and
possibly viewed blocked channels.
Movie Rating
TV Rating
Movie Rating
TV Rating
Display
You can use 0711 if you do not know your
personal access code.
17
SMARTLOCK - BLOCK CHANNELS
fter setting your personal access code, you
Aare ready to select channels you want to
block or censor.
Main
Picture
Sound
Features
Install
Brightness
Color
Press the Number buttons or the
Picture
Sharpness
Tint
CH +/– buttons to select the chan-
1
nel you want to block.
More...
Main
Picture
Press MENU to see the menu.
2
Timer
Sound
Features
Install
SmartLock
1
Press 5 or M to select
POW
1
4
7
2
5
8
0
3
6
FEATURES.
7
3
CH
Press 3 to see the FEATURES menu.
4
CH
9
3-6
/CH
CC
VOL
VOL
8-9
Press 5 or MMto choose SmartLock
1
10
STS
Features
(AutoLock).
EXIT
Timer
5
MENU
SmartLock
Press 3.
SLEEP
MUTE
2
6
CLOCK
SURF
SMART
Press the Number buttons to
PICTURE SOUND
enter your four-digit access code.
7
The SmartLock menu will appear.
Press 5 or M to choose BLOCK
CHANNEL.
Features
Timer
8
9
MAGNAVOX
SmartLock
Access Code
- - - -
Press 3 to turn blocking ON or OFF
for the current channel.
Press CH +/– to select other
channels. Repeat step 9 to turn
blocking ON or OFF for the new
channel.
10
Features
Timer
SmartLock
Block Channel OffStop Time
SmartLock
Access Code
XXXX
Setup Code
Clear All
Channel
Activate
Display
Block All
Movie Rating
TV Rating
Some models refer to
SmartLock as AutoLock.
These features are the same.
SmartLock
Block Channel OnStop Time
Channel 12
Setup Code
Clear All
Channel
Activate
Display
Blocked By SmartLock
Channel Blocking
Access Code
- - - -
Block All
Movie Rating
TV Rating
HELPFUL HINT
Enter your Access
Code to view a
blocked channel.
If you enter your Access Code to view a
blocked channel, ALL blocked channels will
be viewable until you turn off the TV.
Channels will be blocked as before when
you turn on the TV again.
18
SMARTLOCK - CLEAR ALL
fter blocking specific channels, you might
Awant to clear all the channels so you can
view them. To do so, follow these steps.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Press MENU to see the menu.
1
More...
Main
Picture
Press 5 or M to select
Timer
Sound
Features
Install
SmartLock
FEATURES.
2
Press 3 to see the FEATURES menu.
1
4
2
5
8
0
3
6
9
2
6
3
4
5
6
4
7
Press 5 or MMto select SmartLock
7
A/CH
CC
(AutoLock).
VOL
STATUS
EXIT
Features
Timer
9
Press 3.
SmartLock
MENU
1
SLEEP
OCK
MUTE
3
5
8
Press the Number buttons to
enter your four-digit personal
access code. The SmartLock menu
will appear.
SURF
SMART
PICTURE SOUND
2
4
7
Press 5 or M to select CLEAR
ALL.
Features
Timer
7
8
9
SmartLock
Access Code
- - - -
MAGNAVOX
Press 3 to clear all blocked channels.
The Clear All option will show as
Cleared.
Press STATUS/EXIT to remove the
menu.
Features
Timer
SmartLock
Block Channel
Setup Code
Clear All
SmartLock
Block Channel OffStop Time
SmartLock
Access Code
XXXX
Setup Code
Clear All
Channel
Activate
Display
Clear ?
Block All
Block All
Movie Rating
TV Rating
Movie Rating
TV Rating
SmartLock
Block Channel
Setup Code
Clear All
Channel 12
Blocked By SmartLock
ClearedStop Time
Channel Blocking
Access Code
- - - -
Block All
Channel
Activate
Display
Movie Rating
TV Rating
Some models refer to
SmartLock as AutoLock.
These features are the same.
HELPFUL HINT
If you enter your Access Code to view a
blocked channel, ALL blocked channels will
be viewable until you turn off the TV.
Channels will be blocked as before when
you turn on the TV again.
CLEAR ALL does not affect the Movie and
TV Ratings.
19
SMARTLOCK - BLOCK ALL
ou may want to block all the television’s
Ychannels. Maybe you don’t want your chil-
dren to watchTV for a given time.With Block All,
all available channels (including the FRONT
Audio/Video In channel) can be blocked at the
same time.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Press MENU to see the menu.
1
Main
Picture
Timer
Sound
Features
Install
SmartLock
Press 5 or M to select
FEATURES.
6
9
1
4
2
5
8
0
3
6
9
2
2
4
7
Press 3 to see the FEATURES menu.
3
7
A/CH
CC
VOL
STATUS
EXIT
Press 5 or MMto select SmartLock
Features
MENU
Timer
Timer
(AutoLock).
SmartLock
Start Time
Stop Time
Channel
Activate
Display
4
1
SLEEP
OCK
MUTE
Press 3.
3
5
8
SURF
SMART
5
PICTURE SOUND
2
4
7
Press the Number buttons to
enter your four-digit personal
access code. The SmartLock menu
will appear.
6
Features
Timer
MAGNAVOX
SmartLock
Access Code
- - - -
Press 5 or M to select BLOCK
ALL.
7
8
9
Press 3 to set BLOCK ALL to ON
or OFF. Choose ON to block all
channels.
Press STATUS/EXIT to remove the
menu.
Features
Timer
SmartLock
SmartLock
Block Channel
Setup Code
Clear All
Block Channel
Setup Code
Clear All
SmartLock
Access Code
XXXX
Block All
Off
Block All
On
Movie Rating
TV Rating
Movie Rating
TV Rating
Channel 12
Blocked By SmartLock
Channel Blocking
Access Code
- - - -
Enter your Access Code to
view a blocked channel.
Some models refer to
SmartLock as AutoLock. These
features are the same.
HELPFUL HINT
If you enter your Access Code to view a
blocked channel, all blocked channels will
be viewable until you turn off the TV.
Channels will be blocked as before when
you turn on the TV again.
20
SMARTLOCK - MOVIE RATINGS
here are two types of ratings for SmartLock
T(AutoLock). One is based on movie industry
ratings.The other is based onTV industry ratings.
Let’s first look at the Movie Ratings.
Main
Picture
Brightness
Color
Press MENU to see the menu.
Sound
Features
Install
Picture
Sharpness
Tint
1
Press
5
or M to select FEATURES.
More...
Main
Picture
2
3
4
5
6
Timer
SmartLock
Sound
Features
Install
Press 3 to see the FEATURES menu.
2
POW
1
4
2
5
8
0
3
6
4
Press 5 or MMto select SmartLock
(AutoLock).
CH
CH
7
9
7
9
6
A/CH
CC
VO
Press 3.
OL
STATUS
EXIT
Features
Timer
MENU
3
5
Press the Number buttons to
enter your four-digit access code.
The SmartLock menu will appear.
SmartLock
SLEEP
MUTE
1
CLOCK
SURF
SMART
8
PICTURE SOUND
Press 5 or
INGS.
M
to select MOVIE RAT-
2
4
7
9
10
7
8
9
Press 3 to see the MOVIE RAT-
INGS: G, PG, PG-13, R, NC-17, or X.
Features
Timer
MAGNAVOX
SmartLock
Access Code
- - - -
Press 5 or MMto choose a Movie
Rating.
Press 3 to turn the rating ON (to
block viewing) or OFF (to allow
viewing).
All higher ratings will be blocked
automatically. For example, if you
block PG-13, then R, NC-17, and X
will be blocked, too.
10
Features
Timer
SmartLock
Block Channel
Setup Code
Clear All
Movie Rating
G
Off
G
Access Code
SmartLock
PG
PG
PG-13
R
XXXX
PG-13
R
Block All
Movie Rating
TV Rating
NC-17
More...
NC-17
X
Movie Rating
G
On
Channel 12
PG
PG-13
R
OffStop Time
Blocked By SmartLock
Channel
Movie Rating
Activate
NC-17
X
Display
Access Code
- - - -
Enter your Access Code to view a
channel blocked by Movie Ratings.
All channels blocked by Movie
Ratings will be viewable until you
turn off the TV. Channels will be
blocked as before when you turn
on the TV again.
Some models refer to
SmartLock as AutoLock. These
features are the same.
21
SMARTLOCK -TV RATINGS
ou can block programs that are rated byTV
Ybroadcasters as described below.
Enter your access code
to view a channel
Press MENU to see the menu.
blocked by TV Rating.All
channels blocked by TV
Rating will be viewable
until you turn off the TV.
Channels will be blocked
as before when you turn
on the TV again.
SmartLock
1
Block Channel TV-Y
Setup Code
Clear All
TV-Y7
TV-G
Press
5
or M to select FEATURES.
TV Rating
TV-Y
Block All
TV-PG
TV-14
TV-MA
Off
2
3
4
5
6
Movie Rating
TV Rating
TV-Y7
TV-G
Press 3 to see the FEATURES menu.
TV-PG
TV-14
TV-MA
Press 5 or MMto select SmartLock
(AutoLock).
6
Channel 12
POWER
1
4
2
5
8
0
3
6
TV Rating
TV-Y
Blocked By SmartLock
TV Rating
On
CH
Press 3.
TV-Y7
TV-G
Access Code
- - - -
CH
7
9
TV-PG
TV-14
2-5
A/CH
CC
VOL
TV-MA
Press the Number buttons to
enter your four-digit access code.
The SmartLock menu will appear.
7-12
V
STATUS
EXIT
MENU
TV Rating
TV-Y
13
Block All
FV
SLP
CLOCK
MUTE
Press 5 or
TV RATING.
M
to select
TV-Y7
TV-G
7
8
9
10
11
SURF
SMART
1
TV-PG
TV-14
PICTURE SOUND
Press 3 to see theTV RATINGS.
TV-MA
Press 5 or
Y7,TV-G,TV-PG,TV-14, or TV-MA.
M
to choose:TV-Y,TV-
TV Rating
TV-Y
TV-Y7
TV-G
MAGNAVOX
Off
Press 3 to turn the rating ON (to
block viewing) or OFF (to allow
viewing).
TV-PG
TV-14
TV-MA
You can customize TV-Y7,TV-PG,
TV-14, or TV-MA to blockV (vio-
lence), FV (fantasy violence), S (sex-
ual situations), L (coarse language),
or D (suggestive dialog).
Press 3 to enter these sub-menus.
Press 5 or
V, S, L, D, or FV (as available).
TV Rating
TV Rating
TV-Y
TV Rating
TV-Y
TV-Y
Block All
Block All
Block All
TV-Y7
TV-G
V
S
L
TV-Y7
TV-G
V
S
L
TV-Y7
TV-G
V
S
L
TV-PG
TV-14
TV-MA
TV-PG
TV-14
TV-PG
TV-14
D
D
TV-MA
TV-MA
M
to select: Block All,
Press 3 to turn the sub-rating ON
or OFF.
TV Ratings
and Rating Sub-menus
12
13
When a TV Rating is blocked, all
higher ratings are blocked, too.
Press STATUS/EXIT to remove
the menu.
Some models refer to
SmartLock as AutoLock. These
features are the same.
22
SMARTLOCK - BLOCKING OPTIONS
martLock (AutoLock) also offers these special
Sblocking options.
Main
Picture
Brightness
Color
Sound
Features
Install
Press MENU to see the menu.
Picture
Sharpness
Tint
1
2
3
4
5
6
7
8
9
More...
Main
Picture
Press 5 or M to select
Timer
FEATURES.
Sound
Features
Install
SmartLock
Press 3 to enter the FEATURES
menu.
POWER
CH
1
4
2
5
8
0
3
6
9
6
Press 5 or MMto select SmartLock
(AutoLock).
CH
7
A/CH
CC
VOL
VOL
Press 3.
STATUS
EXIT
Features
Timer
10
2-5
7-9
MENU
SmartLock
Use the Number buttons to
enter your four-digit access code.
The SmartLock menu will appear.
SLEEP
CLOCK
MUTE
1
SURF
SMART
PICTURE SOUND
Press 5 or M to select BLOCK-
ING OPTIONS, then press 3.
Press 5 or M to choose BLOCK-
ING, UNRATED, or NO RATING.
Features
Timer
SmartLock
Access Code
- - - -
MAGNAVOX
Press 3 or 2 to turn the blocking
option ON or OFF.
BLOCKING: Choose ON to enable
all the blocking you have set. Choose
OFF to disable your SmartLock set-
tings.
UNRATED: Choose ON to block pro-
grams that are not rated by Movie
Rating or TV Rating. Also set
BLOCKING to OFF.
NO RATING: Choose ON to block
programming that does not have con-
tent advisory data. Also set BLOCK-
ING to OFF.
SmartLock
Setup Code
Clear All
Features
Timer
SmartLock
Block Channel OffStop Time
SmartLock
Access Code
XXXX
Setup Code
Clear All
Channel
Activate
Display
Block All
Movie Rating
TV Rating
Block All
Movie Rating
TV Rating
Blocking Options
Press STATUS/EXIT to remove
the menu.
Blocking Options
Blocking
Blocking Options
Blocking
Blocking Options
Blocking
On
10
On
Unrated
Unrated
Unrated
No Rating
No Rating
No Rating
On
Some models refer to
SmartLock as AutoLock. These
features are the same.
23
TIMER (CLOCK)
heTime controls let you set theTV’s clock.
TYou also can set theTV to turn on or off at a
specific time, or to turn on at a specific channel.
Main
Picture
Sound
Features
Install
Brightness
Color
Press MENU to see the menu.
1
Picture
Sharpness
Tint
Main
Picture
Timer
Press 5 or MMto select
Sound
Features
Install
SmartLock
FEATURES.
More...
2
Press 3 to see the FEATURES menu.
3
Press 5 or MMto chooseTIMER,
then press 3.
4
5
Features
Time
10 :30 AM
Press 5 or MMto chooseTIME,
STARTTIME, STOPTIME,
CHANNEL,ACTIVATE, or DIS-
PLAY.
6
Start Time
Stop Time
POWER
1
4
2
5
8
0
3
CH
6
Features
CH
7
9
Press 3 to enter the menu you
selected at step 5. Adjust these items
accordingly.
TIME: Use the Number buttons to
enter the current time. Press 3 to
choose the AM/PM area, then press 5
or M to choose AM or PM.
Time
Start Time
Stop Time
Channel
12 :30 PM
7
A/CH
CC
VOL
VO
6
2-6
STATUS
EXIT
Features
MENU
Time
1
START TIME: Use the Number but-
tons to enter a specific time at which
the TV will turn on to a specific chan-
nel.
STOP TIME: Use the Number but-
tons to enter a specific time at which
the TV will turn itself off.
Start Time
Stop Time
Channel
SLEEP
CLOCK
MUTE
01 :30 PM
SURF
SMART
PICTURE SOUND
Features
Time
Start Time
Stop Time
Channel
Activate
CHANNEL: Use the Number but-
tons to select the channel at which
you want the TV to turn on (at the
START TIME).
ACTIVATE: Set the Timer to occur
ONCE or DAILY.
0
10
MAGNAVOX
Features
Time
DISPLAY: Set to ON if you want the
time to appear when you change
channels or press STATUS/EXIT on
the remote control. Otherwise, set
DISPLAY to OFF.
Start Time
Stop Time
Channel
Activate
Display
Once
Press STATUS/EXIT to remove the
menu.
Features
Time
7
Start Time
Stop Time
Channel
Activate
Display
On
HELPFUL HINT
Press the CLOCK button on the remote
control for quick access to the TIME menu.
24
SLEEP TIMER
ave you ever fallen asleep in front of theTV
Honly to have it wake you up at two in the
morning with a test pattern screeching in your
ears?Well, yourTV can save you all that trouble
by turning itself off.
Press SLEEP. The Sleep Timer menu
will appear on the screen.
Sleep 15
1
2
Press SLEEP repeatedly to pick
Sleep 30
the amount of time (15, 30, 45, 60, 90,
120, 180, or 240 minutes) before the
TV will turn off.
The Sleep Timer menu will disappear
automatically, or you can press STA-
TUS/EXIT to remove it.
POWER
CH
1
4
2
5
8
0
3
6
Sleep 45
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
1
2
MENU
Sleep 60
SLEEP
CLOCK
MUTE
SURF
SMART
PICTURE SOUND
Sleep 90
MAGNAVOX
During the last minute before the TV
turns off, the remaining seconds will
count down on the TV screen.
Pressing any button during the last
minute will cancel the Sleep Timer.
Sleep 120
During the last 10 seconds of a
Sleep Timer, Good Bye will appear
on the screen.
Sleep 180
Good Bye
9 Sec
45 Sec
Sleep 240
25
CLOSED CAPTIONS
losed Captioning (CC) lets you read the voice
Ccontent ofTV programs on theTV screen.
Designed to help the hearing impaired, on-screen
text boxes will show dialog, conversations, and
activity duringTV programming.
Press CC to see the current Closed
Caption setting.
1
2
Press CC repeatedly to select the
closed caption you want: CC Off, CC
1, CC 2, or CC Mute.
CC Off
CC Mute sets the TV to show closed
captions when you press MUTE. The
TV volume will be disabled until you
press MUTE again to restore the
sound.
CC 1
POWER
1
4
2
5
8
0
3
6
CH
CH
7
9
A/CH
CC
VOL
VOL
CC 2
STATUS
EXIT
MENU
1
2
SLEEP
CLOCK
MUTE
SURF
SMART
PICTURE SOUND
CC Mute
MAGNAVOX
HELPFUL HINT
Not all TV programs and commercials are
broadcast with Closed Captions. Neither
are all Closed Caption modes transmitted
by a station for a closed caption program.
See your TV listings for the stations and
times of Closed Captioned shows.
26
SMARTPICTURE
martPicture resets yourTV’s video settings for
Sdifferent types of programs and viewing con-
ditions. Each SmartPicture setting has specific
values for Brightness, Color, Picture, Sharpness,
Tint, ColorTemperature, Dynamic Noise
Reduction (DNR), and Contrast + levels.
Press SMART PICTURE to see the
current SmartPicture setting.
1
2
Press SMART PICTURE repeat-
edly to select PERSONAL, MOVIES,
SPORTS,WEAK SIGNAL, or MULTI
MEDIA.
PERSONAL - The Personal setting is
what you specify with the picture
adjustments as described on page 14.
Personal is the only SmartPicture set-
ting you can change. All others are
set at the factory during production.
MOVIES - Use when watching video-
tapes or DVDs on a device that is
connected to the TV.
Personal
Movies
POWER
CH
1
4
2
5
8
0
3
6
CH
7
9
A/CH
CC
VOL
VOL
SPORTS - Use when watching sport-
ing events.
STATUS
EXIT
Sports
MENU
WEAK SIGNAL - Use when watch-
ing TV programs when the channel
reception is poor.
MULTI MEDIA - Use when playing
video games on a device that is con-
nected to the TV.
1
SLEEP
CLOCK
MU
2
SURF
SMART
PICTURE SOUND
Weak Signal
MAGNAVOX
Multi Media
27
SMARTSOUND
martSound offers four preset sound options:
SPersonal,Theatre, Music, andVoice. Choose
the one that best suits your current program-
ming.
Press SMART SOUND. The current
Smart Sound setting will appear on the
screen.
1
2
Press SMART SOUND repeatedly
to choose: PERSONAL,THEATRE,
MUSIC, orVOICE.
PERSONAL: This setting is what you
specify with the sound adjustments as
described on page 15. Personal is the
only SmartSound setting you can
change. All others are set at the fac-
tory during production.
Personal
Theatre
Music
Voice
POWER
1
4
2
5
8
0
3
6
THEATRE: Use when watching
movies.
MUSIC: Use when watching a musical
program that has limited dialog.
VOICE: Use when viewing program-
ming that has primarily dialog.
CH
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
MENU
1
2
SLEEP
CLOCK
MUTE
SURF
SMART
PICTURE SOUND
MAGNAVOX
28
SMARTSURF
martSurf lets you set up to eight channels in
Sa quick viewing list. Then, you can use the
SURF button on the remote control to switch
between differentTV programs that currently
interest you.
SmartSurf is not available
with all models.
Press CH +/– or the Number but-
tons to select a channel to add to the
SURF list.
1
Press SURF while the channel num-
ber appears.
2
Press 3 or 2 to add the channel
to the SURF list or delete it from
POWER
CH
1
4
2
5
8
0
3
6
3
the list. An on-screen message will
indicate whether you are adding or
deleting the channel.
Repeat steps 1 through 3 to add addi-
tional channels (up to eight) to the
SURF list.
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
MENU
SLEEP
CLOCK
MUTE
SURF
SMART
PICTURE SOUND
MAGNAVOX
Press SURF repeatedly
during TV viewing to scan
through the channels in
the SURF list.
A/CH Button
Your remote has an A/CH (Alternate
Channel) button. Press A/CH to toggle
between the current and previous channel.
POWER
1
4
2
5
8
0
3
6
CH
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
MENU
SLEEP
CLOCK
MUTE
SURF
SMART
PICTURE SOUND
MAGNAVOX
29
TROUBLESHOOTING
No Power
Remote Control does not work.
• Check the TV power cord. Disconnect the power cord from • Check the batteries. If necessary, replace them with two AA
the power outlet for 10 seconds, then reinsert the plug into
the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
heavy duty (zinc chloride) or alkaline batteries.
• Clean the remote control as well as the remote control sen-
sor on the front of the TV.
• Check the TV power cord. Disconnect the power cord from
the power outlet for 10 seconds, then reinsert the plug into
the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
• Always point the remote control toward the front of the TV
(toward the remote sensor).
• Make sure a fuse has not blown at the power outlet.
No Picture
• Check the antenna or Cable TV connections. Connect the
antenna or Cable TV signal securely to the TV’s 75Ω jack on
the rear of the TV.
• Set TUNER MODE correctly. Details are on page 11.
• Activate AUTO PROGRAM to find all available channels.
Details are on page 12.
TV displays wrong channel or no channels.
• Repeat channel selection.
• Add the channel number(s) into the TV’s memory. Use
CHANNEL/EDIT. Details are on page 13.
• Make sure TUNER MODE is set correctly. Details are on page
11. Then activate AUTO PROGRAM to set up all available
channels. Details are on page 12.
No Sound
• Press theVOL+ andVOL- buttons to adjust the volume.
• Press the MUTE button on the remote control to cancel or
restore the volume.
• If you have connected other equipment to the TV (such as a
VCR or DVD Player), make sure the audio cables are con-
nected securely between the TV and the other equipment.
• Check the SOUND settings. Details are on page 15.
CARE AND CLEANING
WARNING concerning stationary images on theTV
screen: Do not leave fixed images on the screen for
extended periods of time.This can cause uneven aging
of the picture tube.
Normal use of the TV should involve viewing of programs that
have constantly moving or changing images. Do not leave non-
moving images on screen for extended periods of time. Do not
TV Location
•
To avoid cabinet warping, cabinet color changes, and an
increased chance of TV failure, do not place the TV where
temperatures can become excessively hot (for example, in
direct sunlight or near a heating appliance).
•
Allow a free flow of air around the TV.
display the same images too frequently; if you do, subtle “ghost” Cleaning
images can be left on the picture tube. Sources of stationary
images may be Laser discs, video games, Compact Discs
Interactive (CD-i), or paused DigitalVideo Discs (DVDs) or
videotapes.
•
To avoid possible shock hazard, remove the TV’s power
cord from the electrical outlet before cleaning.
Regularly dust the TV with a dry, non-scratching duster.
When cleaning the TV, take care not to scratch or damage
the screen surface. Avoid wearing jewelry or using anything
abrasive. Do not use household cleaners. Wipe the screen
with a clean cloth dampened with water. Use even, easy,
vertical strokes when cleaning.
Gently wipe the cabinet surfaces with a clean cloth or a
sponge dampened in a solution of cool, clear water and a
mild soap or detergent. Use a clean, dry cloth to dry the
wiped surfaces.
•
•
Here are some common examples of stationary images:
• DVD menus list DVD content.
• Letterbox black bars appear at the top and bottom of
the TV screen when a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect ratio. This is available
with some DVDs.
•
•Video game images and scoreboards
•Television station logos cause a problem if they are
bright and stationary. Moving or low-contrast graphics are
less likely to damage the picture tube.
• Stock market tickers may appear at the bottom of the
TV screen if the TV programming covers this news.
• Shopping channel logos, pricing displays may be
bright and may appear constantly during the show.These
are usually in the same location on the TV screen.
•
•
Occasionally vacuum the vents on the rear of the TV.
Never use thinners, insecticide sprays, or other chemicals
on or near the cabinet. They may blemish the cabinet per-
manently.
30
GLOSSARY
Audio/Video Inputs • Jacks (standard RCA) on the front of
Menu • An on-screen list of controls available for adjustment.
the TV to which you connect accessory devices.These jacks
receive picture and sound from equipment such as a DVD
Player,VCR, Camcorder, etc.
Remote Control Sensor • The window or opening on the
front of the TV through which infrared remote control signals
are received.
Auto Program • Scans all available channels from regular
antenna or Cable TV signals and stores only active stations in
the TV’s memory.
Surf • Scanning specific channels in a limited channel list.
Closed Captioning • The broadcast feature that lets you
read the voice content of television programs on the TV
screen. Designed to help the hearing impaired, Closed
Captioning shows dialog, activity, and conversations while a TV
program is in progress.
Coaxial Cable • A single solid wire normally matched with a
metal plug (F-type) end connector that screws (or pushes)
directly onto a 75-ohm jack on the television orVCR.
31
FACTORY SERVICE LOCATIONS
NOTE: Magnavox has chosen Philips Factory Service as its preferred, authorized servicer. Please contact a Philips Factory Service
Center. If you reside in one of our Philips Factory Service Branch areas, you can contact the nearest Service Branch to obtain effi-
cient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No
Charge Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste
ci-dessous), vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après
vente rapide et efficace. Si le produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans
frais. Pour les produits non couverts par la garantie, contactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud.
puede comunicarse con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su
producto está todavía bajo garantía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio.
Para servicio después del vencimiento de la garantía, llame al lugar más cercano de los abajo indicados.
In Canada
To obtain efficient and expedient carry-in, mail-in, or in-home service for your product, please contact Magnavox at:
1-800-661-6162 (French speaking)
1-800-705-2000 (English or Spanish speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le serv-
ice à domicile, veuillez contacter Magnavox á:
1-800-661-6162 (Francophone)
1-800-705-2000 (Anglais ou Espagnol)
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo, favor de comunicarse con Magnavox al:
1-800-661-6162 (francófono)
1-800-705-2000 (Inglés o Español))
Rev. HH - 1/9/2003
EL6540E001
32
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE
CENTER NEAR YOU. MAGNAVOX HAS CHOSEN PHILIPS FACTORY SERVICE AS ITS PREFERRED,AUTHORIZED SERVICER.
YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE,AND YOU WILL RECEIVE PEACE OF
MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÉS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, Á DOMICILE, OU EN SE PRÉSENTANT Á UN CENTRE
DE SERVICE PHILIPS. PLUS DE 600 CENTRES DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE
AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS DANS UN RAYON DE 50
À
75 MILES
(80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNOY EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAV´S DE UN CENTRO
PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNI-
CARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO DE UN RADIO DE 80
75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
A
120 KM
(50
A
ATLANTA
CLEVELAND
CHICAGO
Philips Factory Service
550 Franklin Road., Suite F
Marietta, GA 30067
800-273-1501
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
TAMPA
DETROIT
KNOXVILLE
Philips Factory Service
1911 US Highway 301 North, Suite 100
Tampa, FL 33619
Philips Factory Service
25173 Dequindre
Madison Heights, MI 48071
800-438-1398
Philips Factory Service
One Philips Drive
Building 2
Knoxville,TN 37914
800-821-1767
800-442-2027
SAN FRANCISCO
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
DALLAS
Philips Factory Service
415 N. Main Street, #107
Euless,TX 76040
800-952-3254
PHILADELPHIA
Philips Factory Service
354 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
HOUSTON
LOS ANGELES
Philips Factory Service
20930 Bonita, Ste.V
Carson, CA 90746
800-300-9013
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston,TX 77055
800-952-3254
33
INDEX
Activate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 SmartLock (AutoLock)
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Audio In jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Auto Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AVL (AutomaticVolume Leveler) . . . . . . . . . . . . . . . . . . . . . .15
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Block All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Block Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Clear All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Movie Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 21
TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 22
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Bass Boost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 SmartPicture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 SmartSound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 SmartSurf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Sports (SmartPicture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Start Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Stop Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Channel (Start Time) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Theatre (SmartSound) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Tint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Color Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Treble Boost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Display (Clock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Tuner Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
DNR (Dynamic Noise Reduction) . . . . . . . . . . . . . . . . . . . . .14 TV Operation (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Factory Service Information . . . . . . . . . . . . . . . . . . . . . . .32-33 Unrated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
FRONT channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Video In jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Voice (SmartSound) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Weak Signal (SmartPicture) . . . . . . . . . . . . . . . . . . . . . . . . . .27
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Movies (SmartPicture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Multi Media (SmartPicture) . . . . . . . . . . . . . . . . . . . . . . . . . .27
Music (SmartSound) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Personal (SmartPicture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Personal (SmartSound) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remote Control Operation (Basic) . . . . . . . . . . . . . . . . . . . . .5
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Skipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
34
35
LIMITED WARRANTY
COLOR TELEVISION
90 Days Free Labor
OneYear Parts Exchange
This product must be carried in for service.
WHO IS COVERED?
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
MAKE SUREYOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby. Also
keep the original box and packing material in case you need to return
your product.
WHAT IS COVERED?
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. After one
year from the day of purchase, you pay for the replacement or repair
of all parts, and for all labor charges.
TO GET WARRANTY SERVICE IN U.S.A.,
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact a Magnavox factory service center (see enclosed list) or
authorized service center to arrange repair.
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a particu-
lar purpose, are limited in duration to the duration of this express war-
ranty. But, because some states do not allow limitations on how long
an implied warranty may last, this limitation may not apply to you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Magnavox.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Magnavox at:
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
1-800-705-2000
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Magnavox
is not liable under any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever incurred, even if noti-
fied of the possibility of such damages.)
•
REMEMBER...
Please record below the model and serial numbers found on the prod-
uct.Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
• a product used for commercial or institutional purposes.
WHERE IS SERVICE AVAILABLE?
MODEL # ________________________________________________
SERIAL # ________________________________________________
Warranty service is available in all countries where the product is offi-
cially distributed by Magnavox. In countries where Magnavox does not
distribute the product, the local Magnavox service organization will
attempt to provide service (although there may be a delay if the appro-
priate spare parts and technical manual(s) are not readily available).
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6541E001
Printed in China
36
|
JVC AV 21QS5SP User Manual
JVC AV 29LXB User Manual
Lenovo ThinkVision L2240p User Manual
Marshall electronic MLYNX15 User Manual
NEC EA243WM User Manual
Philips 105S78 User Manual
Philips Brilliance 107P20 User Manual
Philips MDV460 User Manual
Philips SE7452B User Manual
Philips SmartCard PPC127C User Manual